installing undermount drawer slides on old dresser

How to Install Undermount Drawer Slides on an Old Dresser in 7 Simple Steps

If you have an old dresser lying around and you want to give it a new lease of life, installing undermount drawer slides can be an excellent way to do so. Undermount drawer slides are easy to use, and they provide a clean and modern look to any furniture piece. In this article, we will show you how to install undermount drawer slides on an old dresser in seven simple steps.

Step 1: Remove the Old Drawer Slides

The first step in installing undermount drawer slides is to remove the old drawer slides. Start by opening the drawer and removing all the items inside. Then, flip the drawer over and locate the screws holding the old slides in place. Using a screwdriver, remove the screws and lift the slides out of the drawer.

Step 2: Measure the Drawer

Once you have removed the old slides, measure the length and width of the drawer bottom. The slides need to be as long as the drawer bottom and around three-quarters of the drawer's width. You can purchase undermount drawer slides from any home improvement store, and they come in different lengths and widths.

Step 3: Install the Drawer Members

The next step is to install the drawer members, which are the parts of the slide that attach to the drawer. Start by attaching one member to each side of the drawer, using the screws provided. Make sure that the members are level and parallel to each other.

Step 4: Install the Cabinet Members

With the drawer members installed, the next step is to install the cabinet members that attach to the inside of the dresser. To do this, measure the height of the bottom of the drawer and mark it on the inside of the dresser at the back. Screw in the cabinet member at this point, ensuring that it is level.

Step 5: Attach the Slides

With the drawer and cabinet members in place, the next step is to attach the slides to both sides. Position the slides on the drawer members so that they are flush with the side of the drawer, and screw them in place using the screws provided. Repeat this process for the cabinet members.

Step 6: Test the Slide

After installing the slides, test the drawer by sliding it in and out several times. Make sure that it slides smoothly and that it is level.

Step 7: Finish Up

Once you have tested the slide, finish up by reinserting the drawer and replacing any hardware that was removed. Your old dresser now has a new set of undermount drawer slides and will be much easier to use.

In conclusion, installing undermount drawer slides on an old dresser is relatively easy and can give your furniture piece a modern and new look. The above seven steps will help you install the slides quickly and efficiently, and your old dresser will be as good as new in no time.