You are here: Home » News » Installing a Concealed Handle for Sliding Doors

Installing a Concealed Handle for Sliding Doors

Views: 454     Author: Site Editor     Publish Time: 2023-03-23      Origin: Site

Installing a Concealed Handle for Sliding Doors - Step by Step Guide

Once you have chosen the right concealed handle for your sliding doors, it's time to install it. While the installation process may vary depending on the type of handle and door, here is a general step-by-step guide to help you get started.

1. Gather Tools and Materials

Before you begin the installation, you need to gather the necessary tools and materials. These include a drill, screws, a screwdriver, a measuring tape, a pencil, and of course, your concealed handle. Make sure you have the right size drill bit for the screws, and that the screws are long enough to reach the door frame.

2. Measure and Mark

The next step is to measure and mark the location of the handle on your sliding door. Use a measuring tape to determine the center of the door, and mark it with a pencil. Then, using the handle as a guide, mark the position of the screws on the door frame.

3. Drill Holes

Once you have marked the screw positions, it's time to drill the holes. Use the drill bit to create pilot holes in the screw positions. Make sure the holes are deep enough to accommodate the screws, but not too deep that you damage the door panel.

4. Install the Handle

With the holes drilled, it's time to install the handle. Position the handle over the holes and insert the screws through the back of the handle and into the pilot holes. Use a screwdriver to tighten the screws to secure the handle in place.

5. Test the Operation

Once the handle is installed, test its operation to ensure it is working correctly. Open and close the sliding door several times to verify that the handle is secure and does not interfere with the door's movement. Make any necessary adjustments to the handle or door alignment if needed.

6. Finish

Finally, once you have verified that the handle is installed and operational, it's time to finish the installation. This can include cleaning the door surface, installing cover plates to hide the screw heads, or adding any additional accessories to the handle.


Installing a concealed handle for your sliding doors can be a simple and effective way to upgrade your home or office. By following these steps, you can install a handle that enhances the function, safety, and aesthetics of your sliding door.

Product Inquiry


  Tower4jinying Lvdao, International Center,Jihua Road W, ChanCheng, Foshan City, Guangdong, China

  +86-13534492286




Copyright © 2022 Foshan TaiZhou Furniture Fitting CO., LTD. - Furniture Handles, Furniture Hinge, Kitchen Drawer Slide - All Rights Reserved.Privacy Policy