You are here: Home » News » Industry News » How to measure for soft close drawer slides

How to measure for soft close drawer slides

Views: 244     Author: Site Editor     Publish Time: 2023-03-17      Origin: Site

Soft close drawer slides are a popular addition to kitchen cabinets and other furniture pieces. They allow drawers to close gently and quietly, reducing noise and damage to the furniture. However, before you can install the soft close drawer slides, you need to measure the drawers correctly to determine the size of the slides you need. In this article, we'll outline the steps to measure for soft close drawer slides.


Measuring Drawer Width for Soft Close Drawer Slides

Before measuring for soft close drawer slides, it's important to understand the different types of slides available. Soft close drawer slides come in full extension or partial extension, so you need to know which one you want. Full extension slides allow for the entire drawer to be opened, while partial extension slides leave some of the drawer hidden behind the furniture. Here are the steps to measure for soft close drawer slides based on the width of the drawer:


Step 1: Start by measuring the width of the drawer opening. Measure from the inside edge of one side of the drawer to the inside edge of the other side.


Step 2: Next, subtract 1 inch from the width measurement. The slide needs to be slightly smaller than the box to enable it to move easily.


Step 3: Ensure that the slide length is compatible with the drawer length. To do this, measure the length of the drawer from the front edge to the back.


Step 4: Add the thickness of the drawer front to the measurement. This is the distance the drawer slide needs to be able to extend to keep the drawer front flush with the cabinet.


Step 5: The final step is to choose the length of the slide which is the same as the measurement. A good rule is to round down to the nearest half inch to ensure the slide doesn't extend too far past the drawer.

Measuring Drawer Height for Soft Close Drawer Slides


Once you know the width measurement for the drawer, it's time to measure the height. Measuring the drawer height ensures that you choose the right slide length. Here are the steps to measure for soft close drawer slides based on the height of the drawer:


Step 1: Measure the height of the drawer from the bottom of the opening to the top of the opening. Make sure to measure both sides and use the larger measurement as your guide.


Step 2: Subtract 1 inch from the larger measurement. This creates enough clearance for the slide to fit comfortably.


Step 3: Choose a slide length which is the same measurement as the subtraction result. Round down to the nearest half inch for the same reasons mentioned above.


Step 4: Check the clearance of the drawer. To do this, measure the distance from the bottom of the drawer to the bottom of the cabinet opening. Make sure that the slide does not extend beyond this clearance.


In conclusion, measuring for soft close drawer slides requires both width and height measurements to ensure a proper fit. Knowing the different types of slides available and following these simple steps will guarantee your drawers function smoothly and quietly.


Product Inquiry

CONTACT US


  Tower4jinying Lvdao, International Center,Jihua Road W, ChanCheng, Foshan City, Guangdong, China

  +86-13534495386

ABOUT US

PRODUCTS

LINKS

Copyright © 2024 Foshan TaiZhou Furniture Fitting CO., LTD. - Furniture Handles, Furniture Hinge, Kitchen Drawer Slide - All Rights Reserved.Privacy Policy
    